BL400VTE-TT
BL400VTE-TT Automatic labeller for self adhesive vignette
The Marchesini BL400VTE-TT is a continuous motion machine with balcony type, built in steel complying with GMP regulations. Supporting frame and panelling in stainless steel AISI304. Suitable to apply at high production speeds one(1) self-adhesive VIGNETTE on the upper carton face and TWO self-adhesive TAMPER-EVIDENT SEALS on the closure points of formed cartons straight or reverse tuck-in flaps. Conveyance system by toothed belt; unit operating in line with other machines.
Machine suitable for the installation of:
- ink jet or Laser printing system on the upper face and/or on both sides of cartons for printing of readable data as well as corresponding 2D code (Datamatrix);
- relevant camera controls.
Standard Equipment
- Twin horizontal flat conveyor belts, allowing carton accumulation at in-feed;
- Minimum load control at machine infeed with automatic start;
- Timing and distancing device (patented), servo driven, to dispense the cartons onto main toothed conveyor;
- Twin horizontal conveyor toothed belts with adjustable width in order to handle different carton sizes;
- Positive conveyance system. Cartons are kept in pitch, pushed by the vertical cleated belt;
- Continuous mode speed adjustment;
- Automatic working speed synchronization of motors;
- Top belt to hold the seal during placement over the edges;
- Control of pulling motion, of label carrier web;
- End of reel control with machine stop;
- Missing label control on reel;
- Vertical and horizontal adjustment of the TE-SEAL and VIGNETTE position;
- VIGNETTE smoothing system with brushes or rubber rollers;
- TE-SEALS smoothing system with folding devices;
- Folders for straight or reverse tuck-in cartons;
- TE-SEALS and VIGNETTE carrier web rewinding units;
- Regulation of overprint zone on VIGNETTE;
- Maximum load control at the out feed with automatic start,
- Dispensed labels counter;
- All reel holder’s operator side;
- Extracted reel control with alarm;
- Carton reject at discharge and collation in bin on operator side;
- Control rejection bin in position with alarm;
- Tamper Evident internal seals extractable reel, allowing for an easy change.
Machine complete with:
- Power at 400 Volt, 3 phases, 50 Hertz, Ground & Neutral wiring;
- Electric cabinet on board;
- SIEMENS PLC;
- Operator terminal TP700 Touch Screen, 5,7″ color. Seven levels of password;
- Safety Guards in aluminum and Methacrylate. Schmersal type safety switches;
- Machine stop in case a door opens;
- Compressed air control pressure-switch. With machine stop at low-level detection;
- Outfeed carton counter;
- Rejected carton counter;
- Work hour counter;
- The machine has all safeties, required for a safe operation and corresponds to norms;
- Delivered with CE mark;
- Production speed: up to 400 pieces/minute;
- Changeover is made without additional size parts as only some adjustments are sufficient.
Technical data
Carton size
- A: Min 20 mm - Max 120 mm
- B (thickness): Min 15 mm - Max 90 mm
- H: Min 70 mm - Max 250 mm
Label
- A (length): Min 15 mm - Max 80 mm
- B (height): Min 20 mm - Max 60 mm
Seals
- A (length): Min 15 mm - Max 60 mm
- B (height): Min 15 mm - Max 30 mm
Label production speed
- From 0 to 60 meters/minute
Reel diameter
- Max 400 mm
Reel core diameter
- 45 or 75 mm
Production speed
- up to 400 pieces/minute
Commercial References
Gianluca Cavalli - Mirko Malatrasi Sales Managers
Ph. +39 349 392 0666 | +39 342 127 8487
Direct ph. +39 051 0116 303 | +39 051 0116 307
E-mail [email protected]
Ugo Bartolomei Sales & Business Development Manager
Ph. +39 342 778 6619
Direct ph. +39 051 0116 333
E-mail [email protected]
Contact Form